Rapid flow installation – Bully Dog 182062 Dodge 5.9L Cummins 2500-3500 04.5-07 User Manual
Page 8
9
rAPid FlOW inSTAllATiOn
Note: At this point you will skip installing the Straight Pipe(s) and start at the Muffler and work back toward
the rear of the vehicle.
4. Hang the Muffler from Hangers A & B.
5. Install the Front Piece Tail Pipe by sliding
it into the Muffler and tightening Hanger
B to hold it in place. Ensure that the
bend of the is directly over the axle. At
this point don’t tighten down Hanger B
completely, instead wait until the entire
exhaust is installed before tightening ev-
erything down completely.
6. Install the Tail Pipe Tip by sliding it into
the Front Piece Tail Pipe and hanging it
from Hanger C.
7
Install Front Piece Tail Pipe
Front Piece Tail Pipe
Hanger C
Install Muffler
Hanger A
Install Tail Pipe Tip
Tail Pipe Tip
Hanger C
Front Piece Tail Pipe