Bully Dog 54200 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 11)

10
RFI COLD AIR INTAKE
4. Attach the foam pad and rubber grommets to the RFI
enclosure base.
a. Pop the small rubber grommet onto the plastic arm.
b. Slide the metal tube up from underneath.
5. Attach the MAF sensor to the RFI MAF tube.
• Use the black oxide screws provided by Bully Dog and a
Phillips screwdriver.
• IMPORTANT: Do not overtighten the screws, as this
could damage the MAF sensor.