Bully Dog 53204 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 12)

11
RFI COLD AIR INTAKE
2. Install the prepared Stage 2 RFI Tube.
a. Connect the throttle body side first.
b. Use a safe lubricant (like WD-40®).
c. Line up the stock coupler, then push and rotate it
onto the throttle body housing.
d. Check to make sure that the throttle body
connection is sealed.
e. Slide the Stage 2 RFI Tube under the coolant
overflow line.
f. Attach the Silicone Coupler to the MAF assembly.
g. Tighten the band clamps. (Use a flat-head
screwdriver.)
Under Here