Bully Dog 53107 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 7)

6
RFI COLD AIR INTAKE
2. Unplug the mass airflow (MAF) sensor.
3. Remove the stock intake tube.
• Loosen the band clamps at each end of the tube.
(Use a flat-head screwdriver.)
• Do not completely disconnect the clamps; just
loosen them enough to remove the tube.
• Lift the tube out of the engine bay and set it aside.
4. Remove the stock intake box.
• Gently pull upward; the box is held in place by
rubber grommets and should easily pop out.