Bully Dog 51205 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 5)

4
RFI COLD AIR INTAKE
Installation
Installation is very simple, and can be separated into three
parts: Removing the Stock Intake, Preparing the Bully Dog RFI
Intake and Installing the Bully Dog RFI Intake. The complete
installation of the RFI Cold Air Intake System should take
about 20 minutes. The assembly diagram above shows how
the parts of the intake fit together in sequence.
Removing the Stock Intake
1. IMPORTANT: Before beginning installation, disconnect your
battery at the negative terminal.
Failure to disconnect the battery
could result in personal injury and/or
damage to your vehicle.
OEM Intake Lid (4)
Band Clamp (3)
Band Clamp (3)
Stock Intake Tube (4)
Temperature Sensor (2)