Bully Dog Watchdog - Manual (Page 4)

OperATION
19
WatchDog for your vehicle.
Make sure the WachDog is connected to
the vehicle’s OBDII port and turn the
key to the RUN position.
SETUP WIZARD Next
Exit
seCtiOn 2:
Setting up the WatchDog (Very Important)
Proper setup of the WatchDog ensures that the accuracy of the information displayed by the
WatchDog will be reliable. This section is split into two different parts, these two different parts
should be performed in the order in which they appear in this manual to achieve proper setup.
The two parts involved are: Part 1 The Vehicle Setup Wizard, and Part 2 Checking vehicle Speed
and Economy read outs for accuracy.
part 1: VehiCle setup wizarD (autO startup, 9 steps)
The vehicle setup wizard will appear on the WatchDog screen automatically upon initial use of
the WatchDog and subsequently every time the software version is updated. The diagram be-
low shows an example of the Setup Wizard welcome screen, when this screen appears press the
“Next,” button to begin or press the “Exit,” button to perform the Setup Wizard at a later time.
The Setup Wizard involves nine easy steps that take less than five minutes to complete.
While performing the Setup Wizard the vehicle’s engine should be on and running.
To begin the Setup Wizard press the “Next,” button.