Brother DCP-7045N - Manual (Page 24)

Chapter 2
16
„ Documents must be from 148 to
215.9 mm wide and from 148 to 355.6 mm
long, and of a standard weight 80 g/m
2
.
a
Fold out the ADF document output
support flap (1) and the ADF support
flap (2).
b
Fan the pages well.
c
Place your document, face up top edge
first, in the ADF until you feel it touch the
feed roller.
d
Adjust the paper guides (1) to fit the
width of your document.
Using the scanner glass
2
You can use the scanner glass to copy or
scan pages of a book or one page at a time.
Documents can be up to 215.9 mm wide and
297 mm long.
Note
(DCP-7045N only) To use the scanner
glass, the ADF must be empty.
a
Lift the document cover.
b
Using the document guidelines on the
left, centre the document face down on
the scanner glass.
c
Close the document cover.
CAUTION
If the document is a book or is thick do not
slam the cover or press on it.
2
1
1