Calculated Industries 4315 - Manual (Page 9)

Tons per Cubic Yard, press
2 [Conv]
[%]. Value will be permanently stored.
To recall stored value, press
[Rcl] [%].
Area/Volume & Angle Keys
[Length]
Enters the value for length in dimen-
sion problems (e.g., for calculating
area or volume).
[Conv] [Length]
Square-up — Computes the diagonal,
or “square-up,” based on entere d
length and width.
[Width]
Enters the value for width in dimen-
sion problems (e.g., for calculating
area or volume). Also computes width
from entered values of depth and per-
cent grade or slope.
[Conv] [Width]
Percent Grade — Used to enter and
display percent grade. Also computes
percent grade using entered values for
width and depth, or slope.
[Depth]
Enters the value for depth in dimen-
sion problems (e.g., for calculating
volume). Also computes depth from
entered values of width and percent
grade or slope.
User’s Guide – 9