Calculated Industries 4095-C Pocket Reference Guide - Manual (Page 5)

P
ocket
R
efeRence
G
uide
— 7
fractional and decimal inches.

Fraction Bar – Used to enter
fractions. Fractions can be
entered as proper (1/2, 1/8,
1/16) or improper (3/2, 9/8). If
the denominator (bottom) is not
entered, the calculator’s fractional
accuracy setting is automatically
used. Results are always shown in
typical building fractional format.
 
Gallons per Minute (gpm) – Enters
or converts to gallons per minute.
 
Liters per Second (l/s) – Enters or
converts to liters per second.
 
Cubic Feet per Minute (cfm) –
Enters or converts to cubic feet per
minute.
 
Cubic Feet per Second (cfs) –
Enters or converts to cubic feet per
second.
 
Degrees Celsius (°C) – Enters or
converts to degrees Celsius.
 
Degrees Fahrenheit (°F) – Enters
or Converts to degrees Fahrenheit.
(cont'd)

Store – Used for storing values.

Recall – Used with other keys to
recall stored values and settings.
 
Memory Clear (M-R/C) – Clears
Memory without changing current
display.

Accumulative Memory – Adds
value to Accumulative Memory.
 
M- – Subtracts value from
Accumulative Memory.
Dimensional Function Keys

Feet – Enters or converts to feet
as whole or decimal numbers.
Also used with  and  keys
for entering feet-inch values (e.g.,

      ). Repeated
presses during conversions toggle
between fractional feet-inch and
decimal feet.

Inch – Enters or converts to inches.
Entry can be whole or decimal
numbers. Also used with  for
entering fractional inch values (e.g.,

    ). Repeated presses
during conversions toggle between
(cont'd)