BenQ Joybee 180 - Manual (Page 33)

27
Listening to FM radio
The radio mode of the Joybee 180 enables you to listen to FM
radio as follows.
1. Turn on the Joybee 180.
2. Press the MODE button repeatedly
to switch to FM mode.
3. Choose a FM frequency using one
of the procedures described below:
• Press the or keys to skip to the previous or
next frequency. Press and hold down the keys to
change the frequency continuously.
• Press and hold down the or keys to auto-scan
frequencies in the reverse or forward direction. This
function enables you to search for radio channels
automatically.
• Press and hold the key for 2
seconds to display a list of preset
channels. Use the or keys
to select the desired channel and
the key to confirm your selec-
tion.
4. Use the buttons to
increase or decrease the volume as
desired during playback.The OLED
display shows the volume setting
when you change the volume.
• While scanning for channels, if the frequency of the radio matches
that of a preset channel, information regarding the preset channel is
displayed on the OLED display.
• If the radio signal is stereo quality, this is indicated on the OLED
display with a stereo icon.
91 3 MHz STEREO
001/102.7 MHz
002/102.7 MHz
003/102.7 MHz
VOL 07
FM VOL