Performance dc – Clearaudio PERFORMANCE DC User Manual
Page 8
Performance DC
User manual
Page 8
Clearaudio electronic GmbH 2014
2.6
Now you can set the platter carefully onto the bearing. To avoid damage, make sure you slide the
platter slowly and cautiously on the sub-platter/ bearing assembly. Hold the platter securely, so the
platter does not slip or fall on your turntable.
2.7
Please check with the bubble level gauge, if your
Performance DC
turntable is
in a level position.
You can adjust each of the turntable’s feet to get the turntable level.
Only if the turntable is in a level position will you get the best results with your
turntable.
Adjust the height be turning the feet.
Pic. 7: Setting the platter onto the bearing
Pic. 8: Adjustment of the height
Pic. 8: Adjustment of the height