Clearaudio INNOVATION Upgrade to Master - Manual (Page 15)

Upgrade
Innovation to Master Innovation
User manual
Page 14  clearaudio electronic GmbH 2014
13.)
To mount and adjust a cartridge, please follow the user manual of the respective
manufacturer.
14.)
The following final adjustment is very important:
Please ensure that your turntable rack is in a levelled position.
Please check with the bubble level gauge, if your Master Innovation turntable is in a levelled
position.
You can adjust each of the turntables ‘feet to get the turntable levelled.
Only if the turntable is in a levelled position you will get the best results with your
Master Innovation turntable.
15.)
Please connect the mains plug to your power supply.
16.)
By pushing the sensor-switch, marked with “33 1/3” on
the motor, the turntable starts to spin until 33 1/3 rpm
is reached. After the initial set-up we recommend to let
the turntable spin for at least 15 to 30 minutes.
This ensures a smoother break in.
Pic 17a: Alignment of the turntable
Pic. 18: Connection power supply and motor
Pic. 17b: Adjustment of the height