Clearaudio STATEMENT TT1 (Tangential) - Manual (Page 11)

Statement TT 1
User Manual
Page 11  clearaudio electronic GmbH 2014
Now you just have to place the tonearm cable into the assembled tonearm cable holder at
the back of the tonearm. Please make sure that the tonearm cable makes a loop, so that
there is enough freedom for the cable, while sliding the tonearm back and forward.
Please note: You might want to fix the tonearm cable with a tape to the tower bridge.
Picture 12: Placing the glstube into the precision tube holder
Picture 13: Placing the tonearm cable into the assembled tonearm
Picture 14: Fixing the tonearm with a tape