ClearCube M1020W-Series Engineering Workstation - Manual (Page 5)

Page 5 of 14 P/N G0200157 Rev E, 1.4.12.11.2014
ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 (512) 652-3500 www.clearcube.com
M1024W Overview and Features,
Continued
M1024W front
panel The picture and table below show indicators and buttons on the front panel of an M1024W.
Indicator
or
Button
Description
1 Information
LED Information. Shows several states:
Status Description
Red, continuous Overheat condition.
Check cables.
Red, flashing
(every second) Fan failure.
Check fan.
Red, flashing
(every 4 seconds) Power failure.
Check power supply.
Blue, continuous Local Unit
Identifier (UID)
button has been
pressed. Use to aid
identification in
rack mount.
Blue, flashing Remote UID is on.
Use to identify
unit from remote
location.
2 NIC 2 Flashing: network activity.
3 NIC 1 Flashing: network activity.
4 HDD Flashing: hard disk drive activity.
5 Power
(Indicator) Continuous: power is supplied to
M1024W.
6 UID
(Button) Unit Identifier. Press to illuminate
blue LEDs on front panel and rear of
chassis to ease identification in rack
mounts. LED remains on until button
is pressed again.
7 Power
(Button) Press to power on and power off
M1024W.
Continued on next page
2 3 4 5
6 7
1