ClearCube ClientCube 2 with KVM / KM - Manual (Page 12)

Page 12 of 14 P/N G0200161 Rev E, 1.4.08.27.2014
ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 (512) 652-3500 www.clearcube.com
Configuring Zero Clients for VM Connections,
Continued
Configure zero
client
(continued)
Step Action
7 Click the Apply button located at the bottom of the screen. A success message is
displayed.
8 To restart the zero client, click Diagnostics > PCoIP Processor and then click
Reset. A message is displayed. Click OK.
This ends the PCoIP session with the zero client. Repeat this procedure for all
zero clients in the ClientCube 2.