ClearCube I/Port Quick Reference Guide - Manual (Page 18)

14 • I/Port Installation ClearCube I/Port User’s Guide, Rev. C
3. Connect the power cord.
4. Press the power push-button on the I/Port to turn power on.
5. Enable any necessary ports on your switches and routers. Sentral uses ports
6502 UDP, 4001 UDP, 9000 TCP and 9000 UDP. RDP uses port 3389 TCP and
port 139 UDP. Your individual network may use other ports besides these.
NOTE: If using DHCP, verify that name resolution is activated to detect
non-Windows-based systems and that the DNS server is registering the
I/Port.
Figure 5 Eon e100 Port Connections
1. Power supply connector
2. PS/2 keyboard port
3. PS/2 mouse port
4. Audio line out
5. Audio line in
6. Serial ports
7. Parallel port
8. VGA video port
9. 10/100 BaseT Ethernet port
10. USB 2.0 ports (back panel)
11. Network activity LED
12. Power LED
13. On/Off switch
14. USB 2.0 ports (front panel)
1
11
14
13
12
10
2
7
9
8
6
4
3
5
6