ClearCube R Series Pentium 4 - Manual (Page 92)

82 • User Port Installation ClearCube Product Manual and Installation Guide
Fiber C/Port Installation
Installing the Fiber C/Port
The Fiber C/Port installation and setup is the same as a standard C/Port, but does not
require video tuning adjustments. Figure 39 shows the connections on the back of a
Fiber C/Port.
Locate your C/Port in a ventilated area away from any heat sources. For example, do
not stack your C/Port on top of monitor ventilation vents or on top of other significant
heat generating devices.
NOTE: The Fiber C/Port has a built-in five-second reset delay that occurs whenever
the C/Port loses the video signal (e.g., when unplugging the fiber optic cable
from the C/Port, or when PC Blade power management settings take effect).
During this delay, no video signals are passed through to the monitor and the
screen is blank. This delay is present in the product to ensure the Automatic
Gain Circuitry (AGC) in the C/Port performs its optimization routines on a
consistent video signal.
Figure 38 Model R2100 Mass Storage Lockout Jumper Location and Setting