ClearCube Sentral 6.9.3 - Manual (Page 53)

Sentral Quick Start Guide
46 Rev F 2.2.08.06.2014
21.2 Zero Clients
The table below describes the zero client right-click menu options that are commonly used.
Table 7. Zero client right-click menu options
Menu Option Description
Change Mode to
Managed Sets the zero client to poll to Sentral Server and enable connection brokering.
Change Mode to
Unmanaged Zero client does not poll Sentral Server (for deployments using unmanaged
connections).
Rename Device Allows you to create an alias for the zero client.
Reset Device Power cycles the zero client.
Disconnect Device Disconnect a zero client’s active session (see 18 “ Orchestrating User Moves ”
above for a usage example).
Set Peer Enables you to set the IP address of a peer host card (especially for deployments
that do not use connection brokering). If using this option, set the zero client to
unmanaged mode.
Clear Peer Clears the peer address if it is present on the zero client.
Rediscover Rediscovers the zero client and sets it to managed mode.
Figure 28. The zero client right-click menu options