CommScope ConQuest Conduit Construction User Manual
Page 51
Aerial Installation
6.7
Lashing
Aerial Equipment
Set-Up Chute
A set-up chute
is used to guide the
conduit from the reel
trailer to the strand.
Single Roller Block
Used to support conduit
prior to lashing.
Cable Lifter
This tool may be used
to lift conduit into
place and is helpful
to ensure that the
conduit being lifted is
not damaged by exceeding
minimum bend radius.
Lasher
Traditionally used to lash
cable to strand it may
also be used for lashing
conduit to strand. Lashers
are somewhat specific
to cable and strand size
– improper lasher size
or adjustment can prohibit
installation of conduit to strand.
Breakaway Swivel
Used to prevent excessive
pulling tension. It is
designed to break
should it exceed a
pre-set tension limit.
Cable Block Lifter
Used in conjunction with a
lay-up stick to place assorted
cable blocks mid-span.