639538 pg 4, Device operation – CommScope ATC200-LITE-USB User Manual
Page 5
Advertising
4b. Enter new tilt setting and click on Activate as shown on screen
below .
4a. Device adjustments.
Select tilt antenna actuator.
Click
Move Selected
on screen below
.
3b. To conf gure the selected device, make appropriate selections
and text entries on screen below.
Conf guration items marked with
an asterisk are required; saving a new conf guration will be disabled if
any of these f elds are blank
.
Click on Confi gure.
4. Device operation
Advertising