COMTEK M-216 - Manual (Page 8)

Page 6
M-216 AUXILIARY AUDIO INPUT OPERATION
Auxiliary Audio Input Operation
The M-216 transmitter may transmit from a
variety of audio sources such as digital media
players, or any audio device having an auxiliary
or earphone level audio signal.
The auxiliary input cable supplied with the
M-216 transmitter (CB-36 ST) will operate
with any device having a mini 3.5 mm
jack, stereo or mono, and with line level or
earphone level output.
To accommodate a variety of specialty
applications, auxiliary input cables
with RCA phono plug, 1/4” audio
phone plug, and XLR connectors are
available from COMTEK.
Setup
a. Plug the micro-mini
screw-lock whip antenna
into the top center jack
(mic/ant.) of the M-216
transmitter. The whip
antenna should be in a
vertical position away from
any metallic objects to ensure
maximum range performance.
b. Connect the proper auxiliary input cable to the
audio source. Connect the right-angle mini plug end of the
auxiliary input cable into the “AUX” input jack of the M-216 transmitter.
Note: Check to ensure that the audio source is a line level, earphone level,
or fixed AUX level output.
(continued)