Pr-216 controls – COMTEK PR-216 User Manual
Page 4
n
AUDIO OUTPUT JACK:
This stereo 3.5 mm audio output jack accommodates
any low impedance headphone — either stereo or mono; also, charging input for
rechargeable battery, and auxiliary power input.
o
VOLUME CONTROL:
This control has 50 dB of range to adjust the audio
output for a comfortable listening level (clockwise for maximum level).
p
POWER / RECEIVER STATUS INDICATOR:
The LED test indicator displays three functions:
1.
The indicator will illuminate continuously
when unit is “ON” and NO signal is being
received.
2.
A steady slow flash indicates the receiver
is receiving a signal on the tuned channel.
3.
A rapid flash of the LED indicator and a
subtle beeping signal indicates a low battery.
q
ON / OFF SWITCH:
This switch turns the
receiver on and off.
r
OPTIONAL EnviroMic ON / OFF:
Note:
If receiver does not have
EnviroMic option, this switch is
non-operational.
s
CHANNEL SWITCHES:
These rotary switches select the
channel. Channel must be the
same as transmitter’s channel.
(See page 6 for frequency
selection chart.)
t
BATTERY COMPARTMENT:
The battery
compartment features a hinged battery cover
and an alignment system that ensures proper
battery polarity. Battery installation and removal is
facilitated by simply manipulating the rear of the battery.
PR-216 CONTROLS
Page 2
Optional EnviroMic
Battery
Cover Latch