COMTEK PR-216 76-88 User Manual
Page 9
PR-216 / TV 5-6 OPERATING INSTRUCTIONS
Page 8
Low Battery Indicator
The LED on the receiver is a multi-function indicator which includes low
battery detection. When the receiver is first turned on, the indicator will
illuminate continuously indicating that the unit is “ON” and NO signal is
being received. When the receiver is receiving a signal on the tuned
channel, the LED will show a steady slow
flash indicating reception. A rapid flash
on the LED indicator and a subtle beeping
signal through the headphone indicates
a low battery. Replace battery as soon as
possible with a new alkaline battery or
charge the rechargeable battery, as
performance of the receiver will be
unpredictable and may vary from audio
distortion to complete failure to operate.
Battery Removal / Replacement
Battery indicator LED
Pull back battery door latch and allow
battery cover door to spring open. To
remove battery, simply manipulate the
bottom of battery out of the
compartment and remove.
To insert battery, face
battery with negative
terminal in line with large hole in
battery compartment, press battery
into compartment and close battery door until
it snaps shut. Note: It is not possible to put
battery in backwards.