Constellation Audio Virgo Preamplifier - Manual (Page 9)

9
Power supply connections
9. Power outputs
These outputs connect to the power inputs of the Virgo
preamp. Constellation Audio has supplied you with special
spiral-wrapped, gold-plated copper cables designed for
aerospace use. Each of these cables is rated to handle 30
amps.
Each of these jacks mates with a matching jack on the
preamp. Be sure to connect the Analog power jack on the
preamp to the Analog power jack on the power supply, and
the Control power jack on the preamp to the Control power
jack on the power supply.
Before connecting these cables, switch off the power
supply and disconnect it from the AC power. Failing to do
this can damage the Virgo or the power supply.
10. AC input
This AC input accepts standard 15-amp IEC-type power
cords. You may use the high-quality power cord supplied
with the Virgo, or substitute an aftermarket power cord if
you wish.