Cyclopital3D FujiPix Real 3D W3 Camera - Manual (Page 38)

22
More
on
P
h
oto
g
ra
ph
y
B B AUTO AUTO
Choose for crisp, clear snapshots (pg. 15). This
mode is recommended in most situations.
SP1/SP2 SP1/SP2 SCENE POSITION SCENE POSITION
The camera off ers a choice of “scenes,” each
adapted to particular shooting conditions or a
specifi c type of subject, which can be assigned
to the SP1 and SP2 positions on the mode dial.
Each position can be assigned a diff erent scene:
1 Select SP1 or SP2 and press MENU/OK
to display the following menu.
Portrait with soft
overall tone and
beautiful skin tones
L PORTRAIT
CANCEL SET
Note: If the shooting menu is
displayed, highlight
A SCENE
POSITION and press MENU/OK.
2 Press the selector up or down to
highlight a scene (pg. 23).
3 Press MENU/OK to select the high-
lighted option.
4 Press DISP/BACK to return to shooting
mode.
Shooting Mode
Choose a shooting mode according to the scene or type of subject. To choose a shooting mode, rotate
the mode dial to the desired setting (pg. 4). The following modes are available: