Cyclopital3D Sony HDR-TD10 & HXRNX3D1U Stereo Base Extender - Manual

Stereo Base Extender for
Sony 3D Camcorders
HDR-TD10 and HXRNX3D1U
Add greater depth to your 3D videos!
By Increasing the Stereo Base (lens spacing) from 30mm to
140mm you can record subjects that are 4x further away
while enhancing the 3D effect with increased depth!
C
yclopital 3D
Benefits and Features:
• Increases the Stereo Base (lens spacing) from 30mm to 140mm
• Record subjects that are 4x further away while enhancing the 3D
effect with increased depth.
• Easily attaches to the tripod mount of the camcorder
• Sealed mirror chambers
• Replicated tripod mount for optimal balance when using optional grip
• Anti-reflective glass covers on front
• Size: 255x127x192mm (WxHxD)
• Weight: 0.95 kg
*Important tip: you must ZOOM in slightly until there are no black lines
seen on the edge of the display. Maximum HFOV = 31˚ which is
equivalent to a 65mm lens on a 35mm camera.
Warranty
Your adapter comes with a Limited Warranty against defects in workmanship and
materials for 30 days from the date of purchase. The limited warranty does not apply if the
product has been damaged by accident, mishandling, misuse, abuse, or alteration.
All rights reserved, Cyclopital3D, Inc. 2012
The Cyclopital3D Stereo Base Extender (SBE) is perfect for
maintaining accurate depth portrayal when subjects are more distant
from the camera, such as: wildlife, band or theatrical performances,
sporting events, weddings or portraits.
The 30mm fixed lens spacing of the Sony camcorder limits how far
away from the camera your subject can be while still achieving a high
quality 3D photo that displays adequate depth. As you get farther away
from your subject parallax decreases, thus decreasing the 3D effect in
the image.
The SBE uses perfectly aligned high quality front surface mirrors to
effectively increase the stereo base from 30mm to 140mm. This
lengthening of the stereo base allows you to get 4X further away from
your subject while still maintaining an optimal level of parallax.
This SBE is only needed for subjects farther than about 4m from
camera. It is important to remember that your subject should generally
be the closest object in the scene. When using the SBE, objects in the
foreground closer than 4m could cause excessive deviation and make
the image uncomfortable to view in 3D, depending on the background.