Rear panel, Wiring diagram – Antelope Audio 10M Atomic Clock User Manual
Page 7
6. AC Power Connection
This IES AC connection supports inputs of 100-240V AC. This enables the device to automatically
accommodate mains voltages in any country.
7. DC Power Connection
Speakon NL4FX socket for 15 V DC power supply. The power source should be capable of
producing enough power to meet the requirements of the device during its peak consumption period
(the warm up), when 40 Watts of power are required. The 15V power supply units designed for
telecommunication devices typically meet this power output requirement.
8. Atomic Clock Outputs 1-8
BNC outlets for the 10 MHz atomic clock signal. For best results, the cables should not exceed 6
meters (20 feet) in length. Longer cable runs result in increased jitter and other clock errors.
Wiring Diagram
Example connection schematics of the ISOCHRONE 10M.
6
7
8
OCX
Trinity
Eclipse 384
10M
Rear Panel
1
5