Antelope Audio Voltikus - Manual (Page 6)

1
7
4. Quick Start
It only takes a few moments to harness the benefi ts of the Voltikus PSU. Follow these simple steps
to connect Voltikus to your Zodiac DAC:
1. Plug the supplied IEC power cable into the AC Input socket (4) on the rear panel of the
unit and connect the other end to an AC power outlet.
2. Connect the DC power cable to the 18 VDC Output (6) on the rear panel and the other
end to the 18 VDC input socket on your Zodiac DAC Unit.
3. Press the power switch (3) on the rear panel to power up. The power light (1) on the front
panel of the Voltikus illuminates to indicate that it is powered up.
4. The Ground/ Lift switch (5) provides the option of lifting your Voltikus PSU to make it ‘fl oat-
ing’ or keep it grounded.
See more on www.antelopeaudio.com ‒ support area.
5. Front Panel Explained
1. Power light
When lit, this indicates that the Voltikus is powered up.
1