Decimator Design MD-HX User Manual
Page 8
MD-‐HX OPERATING MANUAL VERSION 1.0
Copyright © 2014 Decimator Design Pty Ltd, Sydney, Australia
8
3. Scaling / SD2HD ASPECT (Has SUB-‐MENU with parameter)
This is the aspect ratio conversion used when the Scaler is converting SD to HD.
When the sub menu is highlighted, press the ENTER button to enter this sub-‐menu.
Press the < and > buttons to move left or right through the 11 aspect ratio conversions listed below
and
the
BACK
button
to
leave
this
SUB-‐MENU.
1.
ANAMORPHIC
(IN
and
OUT
have
same
aspect)
7. IN=14:9 with 4:3 PB,OUT=16:9 with 4:3 ZM
2. IN=16:9 with 14:9 PB,OUT=16:9 with 14:9 ZM
8. IN=4:3 FS,OUT=16:9 with 4:3 PB
3. IN=16:9 with 4:3 PB,OUT=16:9 with 4:3 ZM
9. IN=4:3 FS,OUT=16:9 with 4:3 ZM
4. IN=14:9 FS,OUT=16:9 with 14:9 PB
10. IN=4:3 with 14:9 LB,OUT=16:9 with 14:9 PB
5. IN=14:9 FS,OUT=16:9 with 14:9 ZM
11. IN=4:3 with 14:9 LB,OUT=16:9 with 14:9 ZM
6. IN=14:9 with 4:3 PB,OUT=16:9 with 4:3 PB
4. Scaling / HD2SD ASPECT (Has SUB-‐MENU with parameter)
This is the aspect ratio conversion used when the Scaler is converting HD to SD.
When the sub menu is highlighted, press the ENTER button to enter this sub-‐menu.
Press the < and > buttons to move left or right through the 11 aspect ratio conversions listed below
and
the
BACK
button
to
leave
this
SUB-‐MENU.
1.
ANAMORPHIC
(IN
and
OUT
have
same
aspect)
7. IN=16:9 with 14:9 PB,OUT=4:3 with 14:9 CC
2. IN=16:9 FS,OUT=14:9 with 16:9 LB
8. IN=16:9 with 14:9 PB,OUT=16:9 with 14:9 ZM
3. IN=16:9 FS,OUT=4:3 with 16:9 LB
9. IN=16:9 with 4:3 PB,OUT=14:9 with 4:3 PB
4. IN=16:9 FS,OUT=14:9 with 16:9 CC
10. IN=16:9 with 4:3 PB,OUT=16:9 with 4:3 ZM
5. IN=16:9 FS,OUT=4:3 with 16:9 CC
11. IN=16:9 with 4:3 PB,OUT=14:9 with 4:3 ZM
6. IN=16:9 with 14:9 PB,OUT=4:3 with 14:9 LB
5. Scaling / HD2HD ASPECT (Has SUB-‐MENU with parameter)
This is the aspect ratio conversion used when the Scaler is converting HD to HD.
When the sub menu is highlighted, press the ENTER button to enter this sub-‐menu.
Press the < and > buttons to move left or right through the 3 aspect ratio conversions listed below
and the BACK button to leave this SUB-‐MENU.
1.)
ANAMORPHIC (IN and OUT have same aspect)
2.)
IN=16:9 with 14:9 PB,OUT=16:9 with 14:9 ZM
3.)
IN=16:9 with 4:3 PB,OUT=16:9 with 4:3 ZM
6. Scaling / 1080i=1080psf (Parameter)
This indicates if 1080i is recognised as 1080psf instead of 1080i. As 1080i and 1080psf have the same
format structure.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.)
No
ß
1080i input = 1080i
2.)
Yes
ß
1080i input = 1080psf
7. Scaling / Horz Filter (Parameter)
This indicates the level of the horizontal anti-‐aliasing filter prior to the Scaler.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.)
Auto
2.)
None
3.)
Low
4.)
Medium
5.)
High