Brookstone Pedicure Spa - Manual (Page 10)

9
oPeRaTIon
Plug the unit into a properly grounded wall outlet .
Press the MAIN POWER SWITCH on the back of the unit to ON .
Place your feet in the FOOT BEDS .
Press the POWER BUTTON on the CONTROL PANEL .
Press the INTENSITY BUTTON to control the intensity of the massage .
You have 2 Air Pressure Intensities to choose from:
• Mild (L)
• Strong (H)
6 . Press the MODE BUTTON to change massage modes .
You have 3 Massage Modes to choose from
:
• Mode A: 1 second roller action cycle with air pressure massage .
• Mode B: 4 second roller action cycle with air pressure massage .
• Mode C: Continuous, varied speed roller massage with air pressure .
7 . A 15-minute massage is recommended . The unit will automatically turn off if it's
run for more than 20 minutes continuously .
Note: The massage may tickle, which is normal and a sign of blood circulation improvement .
8 . To turn the unit off, press the POWER BUTTON on the CONTROL PANEL .
If not being used for an extended period of time, press the MAIN POWER
SWITCH on the back of the unit .
iMpoRtant: do not sit on the unit or press hard against the foot beds, as this
may cause the motor to labor and overheat, causing a fire or injury to the user.
1 .
2 .
3 .
4 .
5 .