Recommended parameters – DJI Naza-M User Manual
Page 9
©2013 DJI Innovations. All Rights Reserved.
9 |
6.
Select the “Upgrade” option. Check the Main Controller, GPS and IMU firmware version.
7.
Select the “Basic” option. Please follow step-by-step for your first-time-configuration. Basic configuration
is necessary, including Mixer Type, Mounting, RC, and Gain settings.
8.
You can click the “Advanced” option for more parameter settings. Advanced setting is optional. There are
settings of Motor, FailSafe, Intelligent Orientation Control (IOC), Gimbal, Low-Voltage Alert, and Flight
Limits. Read the instruction in the assistant software to obtain more details.
9.
Select the “Viewer” option to check all parameters.
10.
Then break the Micro-USB cable, power off the aircraft. Finished.
(1)
You may be required to fill register information for your first-time-usage.
(2)
If the communication indicator is blue on, please double check the connections.
(3)
Basic configuration is necessary before you go to the “Basic Flying Test”.
(4)
Users are required to install a Windows system, since the software can only run on Windows
system .
(1)
If the firmware upgrade is available, please upgrade it by referring to the Firmware Upgrade
in the Appendix.
(2)
This step is required to use together with the assistant software to obtain more details.
Recommended Parameters
Recommended Settings for using F330/F450/F550
Configuration Information
Basic Gain
Attitude Gain
Motor
ESC
Propeller
Battery
Weight
Pitch
Roll
Yaw
Vertical
Pitch
Roll
F330
DJI-2212
DJI-18A
DJI-8 Inch
3S-2200
790 g
140
140
100
110
140
140
F450
DJI-2212
DJI-30A
DJI-8 Inch
3S-2200
890 g
150
150
100
105
150
150
F550
DJI-2212
DJI-30A
DJI-8 Inch
4S-3300
1530 g
170
170
150
140
170
170