DJI Ground Station - Manual (Page 21)

©2012-2014 DJI. All Rights Reserved. - 21 -
 Technology Requirements

At least 4 linear control channels are necessary; otherwise the joystick function will not work
properly.
 Use USB connection.
 Connection
JoystickChoose Joystick
Refer to the user manual of the specific controller / Joystick you choose, and ensure the USB cable is properly
connected.
Notices:
Please
ENSURE
the Joystick is properly connected physically, do not disconnect the joystick
connection when Joystick Mode is activated.
 Calibration
JoystickCalibration
Steps Joystick (Type1) Type1 Type2
Step 1
Place all trim levers (for
physical fine turning) in their
neutral, or centered position.
Click Next.
For Type 2 controller, might
not have these physical fine
turning levers. Click Next.
Step 2
Center all the sticks. Click
Next to continue.
Center all stick including
throttle stick. Click Next to
continue.
Step 3
Move all sticks through their
motion range completely
several times. When
completed, click Finish.
Move the sticks through their
3D motion range completely
several times, including pitch.
When completed, click Finish.
Fig.③