Vizio E550i-B2 - Quickstart Guide - Manual (Page 5)

Align the base with the neck piece and tighten
three (3) of the included Phillips screws with a
Phillips screwdriver as shown.
Align the stand with the TV and slide it into
place as shown. Tighten the remaining four (4)
Phillips screws into the back of the TV as shown.
When you are finished, place the TV on a stable
level surface
2
INSTALLING THE BASE
It is recommended that two people take part in
the base installation.
Place the TV screen-down on a clean, flat
surface. To prevent scratches or damage to
the screen, place the TV on a soft surface such
as a blanket.
1