Vizio M702i-B3 - User Manual - Manual (Page 26)

4
20
8. Enter your E-mail Address,
First Name, Last Name,
and ZIP Code using the
keyboard on the remote.
Highlight Next and press OK.
9. Use the Arrow buttons on the
remote to highlight your TV
source and press OK.
If you have cable TV, select
whether you have a cable box
or if you connect the TV directly
to a cable from the wall.
10. If the TV Signal channel scan
screen appears, the TV will
need to scan for channels,
which takes several minutes.
Use the arrow buttons on the
remote to highlight Begin
Scan and press OK.
Otherwise, use the Arrow and
OK buttons on the remote
to select the input your TV
source is connected to.
11. When you are finished, the message “Your VIZIO TV is set
up” will appear.
The First-Time Setup is complete.