Vizio M652i-B2 - User Manual - Manual (Page 25)

4
19
The first time you turn on the TV, the Setup App will guide
you through each of the steps necessary to get your TV
ready for use.
Before you begin the first-time setup:
• Your TV should be installed and the power cord
should be connected to an electrical outlet.
• Your devices should be connected.
• If you have a wireless network, have the network
password ready.
• If you are connecting to your network with an
Ethernet cable, connect it to the Ethernet port on
the TV.
To complete the first-time setup:
1. Press the Power button on the
remote. The TV powers on and
the Setup App starts.
2. Use the Arrow buttons on
the remote to highlight
Home Use and press OK.
3. Use the Arrow buttons on
the remote to highlight your
language of preference
and press OK.
Choose your mode.
Select Store Demo for in-store display.
Select Home Use for in-home use.
Seleccione "Home Use" por Modo de Casa o "Store Demo" por Demostración de Tienda.
Choisissez "Home Use" pour Mode Domicile ou "Store Demo" pour Démonstration en Magasin.
Store Demo Home Use
Completing the First-Time Setup
4. Use the Arrow buttons on
the remote to highlight your
country, and then press the
OK button.
5. Use the Arrow buttons on
the remote to highlight your
time zone, and then press
OK.
6. Select the name of your
wireless network from the list
of available networks and
press OK.
Enter the network password
using the keyboard on
the remote, then highlight
Connect and press OK.
7. Use the Arrow and OK
buttons on the remote
to review the Terms and
Conditions and Privacy
Policy. When you are finished,
highlight I Accept and
press OK.
The images are for illustrative purposes only, the actual number of ports may vary.