Vizio M322i-B1 - User Manual - Manual (Page 26)

4
20
8. Use the arrow buttons on
the remote to highlight your
TV source and press ok.
If you have cable TV, select
whether you have a cable
box or if you connect the TV
directly to a cable from the
wall.
9. If the TV Signal channel scan
screen appears, the TV will
need to scan for channels,
which takes several minutes.
Use the arrow buttons on the
remote to highlight Begin scan
and press ok.
Otherwise, use the arrow and
ok buttons on the remote to
select the input your TV source
is connected to.
10. When you are finished, the message “Your VIZIO TV is set up”
will appear.
The first-Time setup is complete.