Led indicators, Function led behavior description – Vizio S2120w-E0D - Quickstart Guide User Manual

Page 14

Advertising
background image

12

The LED Indicators give visual feedback when you press buttons on the remote control.

LED INDICATORS

Function

LED Behavior

Description

Input

Press the INPUT button on the remote to cycle through each available input:

Analog Audio In - AUX (1)

Analog Audio In - AUX (2)

Coaxial In- Digital (3)

Digital Optical Audio In - Optical (4)

Bluetooth

USB Device - USB

Bluetooth

Pairing

(When searching for device)

Flash from Left to Right

and back continuously.

Press and hold the button on the remote. The Sound Stand will be discoverable for 15

minutes. You can now search for the Sound Stand (VIZIO S2120w) using your Bluetooth

Device. The Sound Stand will power down if no device is found.

Note: Set your Bluetooth device into pairing mode prior to the Sound Stand.

DTS TruVolume

On/Off

TruVolume On:

TruVolume Off:

Press the TVOL button to enable/disable TruVolume. When enabled (On), TruVolume

provides a consistent and comfortable volume level for a more enjoyable listening

experience.

DTS TruSurround

On/Off

TruSurround On:

TruSurround Off:

Press the TSHD button to enable/disable DTS TruSurround. When enabled (On), all inputs will

produce virtual surround sound. When disabled (Off), all sources will playback in 2.1 stereo.

Treble Levels

Two center LEDs indicate

Treble level 0.

Press the TREBLE button then press the Next/Previous button to increase/decrease the

treble level. The LED indicators will move to the right with increasing levels and to the left with

decreasing levels.

Bass Levels

Two center LEDs indicate

Bass level 0.

Press the BASS button then press the Next/Previous button to increase/decrease the bass

level. The LED indicators will move to the right with increasing levels and to the left with

decreasing levels.

Dolby Digital

Dolby Digital Indicator.

Dolby Digital is only available on either the Coaxial In or Digital Optical Audio In inputs.

When a Dolby Digital signal is detected, the Dolby Digital LED indicator will light up for 5

seconds before fading away.

Analog Audio In - AUX (1)

Analog Audio In - AUX (2)

Coaxial In - Digital (3)

Digital Optical Audio In -

Optical (4)

USB Device - USB

Bluetooth

Advertising