Metrohm MagIC Net 3.1 - Manual (Page 10)

10 8.102.8061EN / 2014-05-23
The option Client/Server installs the client and the database server on
your computer. Select this option if your computer will be used as server.
NOTE
The default paths are different for Windows XP, Windows Vista, Win-
dows 7 and Windows 8.
The database path must not be on a network drive.
The default backup path may be on a network drive.
With Client, only the client will be installed and you have to select the
database server (has to be installed in advance!) you would like to use
with the button. The network server name or the IP address is
accepted as the name.
You can change the ports MagIC Net uses to communicate with the
database and administration server with the [Advanced…] button. If the
ports are already used, an appropriate error message will appear. Ask
your system administrator for more information about this. Continue with
[Next >].
7 All further installation steps correspond to those of the single workplace
installation from point 6 onwards.
4 Modifying/repairing/removing the installation
and upgrading the license
In order to carry out modifications on the current MagIC Net installation, start
the setup.exe file on the installation CD or click under:
￭ Windows XP - Control Panel ▶ Software