2 deaerating the high pressure pump, Deaerating the high pressure pump – Metrohm 850 Professional IC Anion User Manual
Page 44
Advertising
2.10 High pressure pump
■■■■■■■■■■■■■■■■■■■■■■
34
■■■■■■■■
850 Professional IC – Anion
2.10.2
Deaerating the high pressure pump
The high pressure pump will only operate perfectly if the pump head con-
tains no more air bubbles. Therefore it must be deaerated during initial
start-up and after every change of eluent.
Caution
The high pressure pump must not be deaerated before the initial start-
up (see Chapter 3.1, page 61).
Deaerate the high pressure pump as follows (see Figure 19, page 35):
Advertising