Metrohm 930 Compact IC Flex SeS/Deg - Manual (Page 31)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
930 Compact IC Flex SeS/Deg (2.930.1460)
￭￭￭￭￭￭￭￭ 23
CO
2
adsorption cartridge, an H
2
O adsorption cartridge (6.2837.010) is
also installed.
Accessories For this step you need the following accessories:
￭ Adsorption cartridge holder (6.2057.080) with 4 clips, an adapter
(6.1808.190) and a piece of PVC tubing.
￭ CO
2
adsorption cartridge (6.2837.000)
￭ H
2
O adsorption cartridge (6.2837.010)
All of the parts are located in one accessory kit: Vario/Flex SeS
(6.5000.020).
Installing the adsorption cartridge
CAUTION
The following preparatory steps absolutely must be carried out for CO
2
suppression to operate correctly.
Preparing the adsorption cartridges:
￭ Prepare the H
2
O adsorption cartridge for use as specified in the provi-
ded leaflet.
￭ Remove the protective cap on the tip of the CO
2
adsorption cartridge.