Metrohm TitrIC 7 - Manual (Page 6)

Application Bulletin 321 e
Installation Instructions of TitrIC 7
Page 6/16
3 Cable connections
First all the power cables are connected to the instruments. Both the instruments and the PC remain
switched off. After connect the following cables according to this list:
Cable USB A - mini-DIN 8P (6.2151.000) from 856 Conductometer to PC, do not connect!
USB cable (6.2151.020) from 2.850.2150 IC (use PC port) to USB 1 port of the PC
Cable Extension Module – Professional IC 6.2156.060 is used to connect the 872 to the 850
instrument. (Alternatively 6.2156.070 if you place the Extension module next to the 850
instrument)
USB cable (6.2151.000) from 855 Controller to PC – supplied with 855, do not connect!
MSB cable from Dosino 800, 20 mL (0.1M HCl) to 855 MSB 1, do not connect!
MSB cable from Dosino 800, 50 mL (Sample Transfer to External Cell) to 855 MSB 2, do not
connect!