Metrohm 930 Compact IC Flex Oven/ChS/PP - Manual (Page 25)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
930 Compact IC Flex Oven/ChS/PP (2.930.2300)
￭￭￭￭￭￭￭￭ 17
4.6 Installing the high-pressure pump
The high-pressure pump is completely connected. No installation work is
required.
4.7 Installing an inline filter
The inline filter is completely connected. No installation work is required.
4.8 Installing the pulsation absorber
The pulsation absorber is installed between the high-pressure pump and
the injection valve. It protects the separation column from damage caused
by pressure fluctuations such as those when switching the injection valve,
and reduces interfering pulsations during highly sensitive measurements.
The pulsation absorber is completely connected. No installation work is
required.
4.9 Injection valve
The injection valve is completely connected. No installation work is
required.
4.10 Suppressor
The suppressor drive of the 930 Compact IC Flex can hold various rotors.
The large rotors such as the SPM Rotor A (6.2835.000) and the MSM-HC
Rotor A (6.2842.000) can be inserted directly.
Small rotors like the MSM Rotor A (6.2832.000) and the MSM-LC Rotor A
(6.2844.000) must first be fitted into the adapter (6.2842.020) which can
then be inserted into the suppressor housing.
A connecting piece (6.2835.010) is used for all rotors for connecting the
suppressor to the IC system.