3 connecting the 804 ti stand, Connecting the 804 ti stand – Metrohm 804 TI Stand User Manual
Page 18
Advertising
3.3 Connecting the 804 Ti Stand
■■■■■■■■■■■■■■■■■■■■■■
10
■■■■■■■■
804 Ti Stand
Mounting the propeller stirrer
1
2
Mounting the propeller stirrer as follows:
1 Insert the propeller stirrer 802 Stirrer without the stirring propeller
from above into the center opening of the electrode holder.
2 Plug the stirring propeller from below to the propeller stirrer.
3.3
Connecting the 804 Ti Stand
Connect the titration stand as follows:
1 Exit the control software.
2 Connect the connection cable of the titration stand to one of the
sockets marked with MSB on the rear of the control device.
Advertising