Metrohm Vision Installation - Manual (Page 2)

2 8.105.8006EN
Serial port ￭ Required for System II (Model 6500 Series)
￭ 1 additional required for Vision I/O Module inter-
face
The Windows user (installer) must have administrator
rights in order to install Vision software.
Network environ-
ment ￭ 100 Mbits/sec, stable and permanent
￭ Communication via Ethernet; RJ-45 connection
￭ XDS requires DHCP server with available TCP/IP
addresses (permanent address may be assigned)
System backup Network or CD backup required for data archiving
2 Installation
2.1 Server installation for MultiUser
NOTE
System platform
The System platform for installation the server and clients have to be with
the same Windows version.
The Multi-user installation involves two main steps:
￭ 1: - "Install Vision Server"
￭ 2: - "Install Vision Client" (see Chapter 2.2, page 5)
1 After start the server installation, this screen will be displayed:
Next, click on "Install Vision Server".
2 Vision requires the name and company of the primary user. Enter your
name and company, the combination of the serial number and license