Banner MINI-BEAM Series - Manual (Page 5)

page 5
MINI-BEAM Modifications
Description
All MINI-BEAM sensors may be ordered with an integral 9 m (30')
cable in place of the standard 2 m (6.5') cable
Standard dc MINI-BEAM sensors with 1 millisecond output
response may be modified for 0.3 millisecond (300 µs) response.
NOTE: Faster response comes at the expense of lower excess gain.
Also, operating temperature range becomes -20° to +50°C (-4° to
+122°F)
Model Suffix Modification
MHS
Example of Model
Number
W/30 9 meter (30') cable
Modified for High
Speed
SM312LP W/30
SM312LPMHS
All MINI-BEAMs may be built
with a 150 mm (6") long
integral cable which is
terminated with the
appropriate QD connector.
QDP
Pigtail Quick
Disconnect
SM312LPQDP
MINI-BEAM ® Sensors
SM312LV, SM312LVAG and SM312LP
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Replacement Lens Assemblies
MINI-BEAM lens assemblies are field-replaceable.
Model Description
UC-300AG
UC-300L
UC-300LP
Replacement lens for LVAG
Replacement lens for LV
Replacement lens for LP
Retroreflective Targets
Banner offers a wide selection of high-
quality retroreflective targets. See the
Banner Photoelectric Sensors Catalog.