Banner PresencePLUS BCR 1.3 Series User Manual
Page 281
2. Use the scroll bar and select an Inspection Number by clicking in the dialog next to the number
where you want to store the inspection, or enter a number in the Inspection Number field.
3. In the Inspection Name field, enter a name for the inspection.
4. Click the Save button in the dialog.
Note: Check the Space Needed and Space Available fields to ensure there is room to save
an inspection. You can choose whether to save a reference image. Not saving a reference image
with the inspection frees up a lot of room onboard the sensor. However, inspections that include
any of the following tools require a reference image to be saved:
• Geometric Find
• Geometric Count
• Pattern Find
• Pattern Count
• Color Match
• Color BLOB
281
Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 000000
Saving Inspections
7/2009