BenQ DC C40 - Manual (Page 19)

BenQ DC 5530 User’s Manual
Using the DC C30/C40 15
Eng
lisc
h
3.8 Using Different Metering Options
There are 3 different light metering options available on your camera. Auto Metering
automatically selects the best exposure for you, Multi Metering selects an exposure based on
readings from multiple points in the subject area and Spot Metering selects an exposure
based on a single reading taken from the center of your picture.
1. Turn the camera on and make sure it is in Photo
mode.
2. Press the MENU button.
3. Use the UP or DOWN buttons to select the Metering
option.
4. Use the LEFT or RIGHT buttons to select an option
from the list.
5. Press the SET button to save your selection and leave
the Metering submenu.
3.9 Setting the White Balance
Adjust the white balance to match different light sources such as sunlight, incandescent
(tungsten) lighting or, fluorescent lighting.
1. Turn the camera on and make sure it is in Photo or
Video mode.
2. Press the MENU button.
3. Use the UP or DOWN buttons to select the White
Balance option.
4. Use the LEFT or RIGHT buttons to select an option
from the list.
5. Press the SET button to save your selection and leave
the White Balance submenu.
Metering - Auto WB
YMD
A
123
+/
WB - Daylight
WB
YMD
A
+/
WB - Black & White
WB
YMD
+/