Behringer SRC2000 User Manual
Ultramatch src2000
Advertising
Table of contents
Document Outline
- TABLE OF CONTENT
- 1. INTRODUCTION
- 1.1 Some Words on Digital Sample Rate Conversion
- 1.2 The AES/EBU and SPDIF Standards
- 2. THE CONCEPT
- 2.1 The Quality of Components and Circuits
- 2.2 Digital Inputs and Outputs
- 2.2.1 XLR
- 2.2.2 RCA
- 2.2.3 Optical (TOSLINK)
- 2.2.4 Wordclock (BNC)
- 3. INSTALLATION
- 3.1 Rack Mounting
- 3.2 Mains Connection
- 3.3 General Instructions on Connections
- 3.3.1 Balanced XLR Connection (AES / EBU)
- 3.3.2 Unbalanced Coaxial Connections (SPDIF)
- 3.3.3 Optical Connections (SPDIF)
- 3.3.4 Wordclock
- 3.3.5 Connections with Adapters
- 4. CONTROLS AND FUNCTIONS
- 4.1 Front Panel
- 4.1.1 Input Section
- 4.1.2 LED-Display
- 4.1.3 Output Section
- 4.2 Rear Panel
- 5. MODE OF OPERATION
- 5.1 Basic Settings
- 5.2 Elimination of Errors
- 5.3 Conversion to 32 kHz
- 5.4 Emphasis Correction
- 6. APPLICATIONS
- 6.1 Sample Rate Conversion
- 6.1.1 Operation in a DAT-Based Studio
- 6.1.2 Harddisk Recording
- 6.1.3 Reduction of Memory Requirements
- 6.1.4 Master/Slave Conflicts
- 6.1.5 Correction of unformatted passages
- 6.2 SCMS Removal
- 6.3 Line Booster, Signal Refresher
- 6.4 Sample Rate Correction
- 6.5 Varispeed Applications
- 6.6 Format Conversion
- 6.7 Format Interface
- 6.8 Patchbay/Split Operation
- 6.9 The ULTRAMATCH in a home-recording studio
- 7. SPECIFICATIONS
- 8. WARRANTY