Banner QMT42 Series - Manual

QMT42 Series Long-Range Diffuse Sensors
Adjustable Sensing Distance of up to 6 m (20')
Printed in USA P/N 57890
Features
• Powerful, collimated infrared light source and special lensing allows reliable
long-range detection of even the darkest objects
• Compact, rugged, low cost self-contained sensors in metal die cast housings
• Leakproof IP67 (NEMA 6) construction for reliable sensing in harsh environments
• Outstanding electrical noise immunity
• Dual LED system indicates sensor performance
• Choice of integral cable or quick disconnect connector
Infrared, 880 nm
QMT42VN6DX
QMT42VN6DXQ
10 mm
(0.4")
to
6 m
(20')
2 m (6.5')
4-pin Euro QD
10-30V dc
NPN
1
10
100
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
0.01 m
0.033 ft
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
QMT42DX
Diffuse Mode
Models Range Cable
Supply
Voltage
Output
Type
Excess Gain
QMT42VP6DX
QMT42VP6DXQ
2 m (6.5')
4-pin Euro QD
PNP
QMT42 Long-Range Diffuse Mode
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current
Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
!
7.5 m
25 ft
6.0 m
20 ft
4.5 m
15 ft
3.0 m
10 ft
1.5 m
5 ft
0
0
10 mm
20 mm
30 mm
10 mm
20 mm
30 mm
0
0.4 in
0.8 in
1.2 in
0.4 in
0.8 in
1.2 in
DISTANCE
Diffuse Mode
QMT42DX
Beam Pattern
Performance based on 90% reflectance white test card