Banner RP-LM40 Rope Pull Switches User Manual
Rp-lm40 series rope pull switches, Datasheet
Datasheet
RP-LM40 Series 40 mm Limit-Switch-Style Switches with Rope Actuators
•
Positive-opening safety contacts (IEC 60947-5-1), not dependent upon
springs
•
Standard limit-switch housing (EN 50041)
•
Heavy-duty die cast metal housing, rated IP65, suitable for demanding
industrial environments
•
Rope spans up to 6 m (20 ft)
•
Both safety contacts are closed with normal rope tension; one contact
opens when rope is pulled, the other contact opens if rope breaks (or if
tension is reduced from normal amount)
•
Long life, switch rated at 1 million mechanical operations, minimum
•
Two available models, trip and latch
•
Protective Earth Terminal (IEC 60947-1)
Model
Actuation
Max. Rope
Length
Run Position
Cable Pulled
Cable Break
Switching
Diagram
RP-LM40D-6
Trip
6 m (20 ft)
25
26
13
14
25
26
13
14
25
26
13
14
13-14
25-26
Break
Pull
50N
70N
0 (0)
1.6 (0.06)
3.6 (0.14)
4.4 (0.17)
5.0 (0.20)
mm (in)
RP-LM40D-6L
Latch
13-14
25-26
Break
Pull
50N
70N
0 (0)
1.2 (0.05)
3.2 (0.13) Latch
4.8 (0.19)
mm (in)
Contacts:
Open
Closed
Transition
RP-LM40 Series Rope Pull Switches
P/N 62082 Rev. C
23 January 2014